Hot Recommend IScancar, MINI DSG Reader for VW Audi and Autologic Diagnostics

2014 New MINI DSG OBDII EOBD Cars Trouble Codes Scanner is a handheld diagnostic scanner for almost all VW Audi with protocol KWP1281 (K-line), KWP2000 (K-line) and KWP6000 (CAN). IScancar Scanner supports almost all control modules of VW Audi vehicles, also maintain dashboard mileage, read immobilizer code and match key.
MINI DSG is used for AUDI and VW new car. Usually the tool for reading/writing new VW/AUDI gearbox data is few and very expensive, now the low cost tool is coming. You don’t need remove ecu from car, only connect some plug to the DSG ECU and then you can read/write and save dump to bin flie.

MINI DSG Highlights:
Coding Individualisation & Programming (CIP) Software
Providing independent garages with the MOST
Retro Fitting components & conversions
Country variant configuration

MINI DSG reader VW AUDI software installation and activation

MINI DSG?is a professional tool to read and write VW / AUDI latest dual-clutch DSG gearbox data and it is currently the empty non-original equipment.

When you install the software, what should you pay attention to?

1) DO NOT USE the internet

Disconnect the internet when you install or use this software. Otherwise software will prompt you to update. This software cannot be updated online.

2) DO NOT USE anti-virus software

This software will be destroyed by anti-virus software.

How to activation the? MINI DSG software?

Open the software “DSGReader”, it will pup up a interface, prompt you “License expried”. Do not worry, it is normal. Then click “OK” button.

FAQ about 2014 MINI DSG Reader (DQ200+DQ250)

MINI DSG
Q: What car models does it support?
A: MINI DSG is mainly used for Audi and VW cars. It supports K-line and CAN vehicles.
Q: Does this 2014MINI DSG Reader can read and write Flash and Eprom?
A: It can read and write latest dual-clutch DSG gearbox data for Audi and VW. But it cannot read and write flash and eprom.
Q: I received the 2014 MINI DSG Reader, but the CD is a blank one. How to do with it?
A: You can turn to the following page and download the file MINI DSG

About operating system requirement
Q: Can I set up and run this device on my Win7 laptop?
A: No, you cannot. You should use it on Windows XP system only so that the operation can be conducted smoothly.
About after-sale service
Q: Does it have warranty?
A: The main unit has one year warranty.
About activation and the newest software
Q: When I run “dsgreader.exe”, it shows me “license expired”. What should I do?
A: Send the ID to the seller for activation. Otherwise, it will show “License Expired”.
Q: Where can I download the newest software?
A: You can turn to this MINI DSG and download the software by yourself.

MINI DSG Reader Said License File Error, What to Do?

,

I got this “License File Error” when using MINI DSG today. Please see the picture below. It was my first time using this tool and I had followed your video to install it. I also have disable the anti virus software on my tablet during DSG Reader installation. What could be wrong? And what should I do? Thank you.

I chatted with our technician, and he said this was caused by old software. Please download the latest 2014.6 MINI DSG Reader in the following link:
MINI DSG After installing the latest software, your MINI DSG Reader will be activated and the issue should be fixed. If the problem still stays, please contact me again and we will arrange our technician to help you install it.

The attention for MINI DSG software installation and activation

The following attention you should take when you install the MINI DSGsoftware.

1. Do not use anti-virus software
Because this mini dsg software will be destroyed by anti-virus software.

2. Do not use the internet MINI DSG
Disconnect the internet when you install or use this mini dsg software. Otherwise software will prompt you to update. This mini dsg cannot be updated online.

The steps for how to activate the mini dsg software.

Open the software “DSGReader”, it will put up a interface. prompt you “License expried”. Do not worry, it is normal. Then click “OK” button.
Then you will see the following interface. Copy this ID, send this ID and your order number to MINI DSG We will resend you the license back.
This is the license we send it to you. Decompress it and use it to your software.

How to Install and Activate MINI DSG Reader VW AUDI Software?

MINI DSG is 2014 new released, used to read and write latest dual-clutch DSG gearbox data for AUDI and VW. MINI DSG Reader support both K-Line and CAN BUS vehicle.

Many customers are interested in this MINI DSG. Then, how to install and activate the software? What should we pay attention to?

1. DISCONNECT the internet

Disconnect the internet when you install or use this software. Otherwise software will prompt you to update. This software cannot be updated online.

2. CLOSE anti-virus software

This software will be destroyed by anti-virus software MINI DSG.

How to activation the MINI DSG reader VW AUDI software?

Open the software “DSGReader”, it will pop up a interface, prompt you “License expired”. Do not worry, it is normal. Then click “OK” button.

The cheapest Twin-clutch / Directly Shift Gearbox (DSG) gearbox reader

I believe we all remember this headline report on MINI DSG VW Recall 2013- One of biggest recalls in VW’s history, because of problems with faulty 7-speed gearboxes which cause a loss of power while driving and thousands more are being recalled because of fuse problems which cause lights to cut out. This issue brings a big attack to VW Audi group.

But today, I would like to introduce you one tool which is associated with DSG (Direct Shift gearbox), it is MINI DSG, it is related not with this VW recall issue, but it can read and write Direct Shift Gearbox (DSG) data which works like KESS and Fgtech ECU programmer, any data stored in the gearbox, you are allowed to read out and write by this tool. As its name suggests, it only can read and write data for DQ200 model and DQ250 model made from VW Audi.

Does it need to remove the ECU?  The answer is no, just plug the cables to the DSG ECU and then we can read/write and save dump to bin flie, as the following photos display